Complete range of double worm/auger grinder(s)
Ø225 – Ø400
Complete range of single worm/auger grinder(s)
Ø200 – Ø550
DOUBLE WORM/AUGER GRINDERS
CombiGrind CG 400 Heavy Duty,
Brutalis
CombiGrind CG 330 Heavy Duty
CombiGrind CG 300 Heavy Duty
CombiGrind CG 300
CombiGrind CG 225
VIEW DOUBLE WORM/AUGER GRINDER PROGRAMME
| Grinder Programme: | Motor/kW |
|---|---|
| DOUBLE WORM/AUGER GRINDERS: | |
| CombiGrind CG 400 Heavy Duty, The Beast | 22 + 110 – 200 kW |
| CombiGrind CG 330 Heavy Duty | 22 + 110 – 132 kW |
| CombiGrind CG 300 Heavy Duty | 22 + 90 – 132 kW |
| CombiGrind CG 300 | 22 + 90 kW |
| CombiGrind CG 225 | 15 + 75 kW |
DOUBLE WORM/AUGER GRINDER FEATURES
• Constructed in stainless steel AISI 304.
• Grinders from Ø225 mm – Ø400 mm.
• Grinding capacities from 2000 – 40,000 kg/hour.
• Large hopper infeed area preventing bridge building.
• Low noise level.
• Low energy consumption.
• 1 or 2 units dismantling crane.
• Heavy Duty construction.
scanControl System
scansteel foodtech® CombiGrind Series is equipped with our scanControl System. This system continuously monitors the frequency converters on the feeding/pre-grinding worm/auger and the grinding worm/auger for grinding section. If, for any reason, the grinding worm/auger is overloaded by the feeding/pre-grinding worm/auger, the scanControl System decreases the feeding speed until acceptable grinding conditions have been re-established. In extreme situations, the scanControl System actually reverses feeding/pre-grinding worm/auger.
SINGLE WORM/AUGER GRINDERS
SuperGrind SG 550/310
SuperGrind SG 400/260
MG 400 Heavy Duty, Brutalis
MG 400 Heavy Duty
MG 400
MG 400
MG 330
MG 330
MG 225
MG 200
VIEW SINGLE WORM/AUGER GRINDER PROGRAMME
| Grinder Programme: | Motor/kW |
|---|---|
| SINGLE WORM/AUGER GRINDERS: | |
| SuperGrind SG 550/310 Super Heavy Duty, Brutalis | 160-250 kW |
| SuperGrind SG 400/260 | 110-160 kW |
| MG 400 Super Heavy Duty, Brutalis | 160-200 kW |
| MG 400 Heavy Duty | 132-160 kW |
| MG 400 | 90-110 kW |
| MG 330 | 75-90 kW |
| MG 250 | 55 kW |
| MG 225 | 45 kW |
| MG 200 | 30 kW |
SINGLE WORM/AUGER GRINDER FEATURES
• Constructed in stainless steel AISI 304.
• Grinders from Ø200 mm – Ø550 mm.
• Grinding capacities from 2000 – 40,000 kg/hour.
• Large hopper infeed area preventing bridge building.
• Low noise level.
• Low energy consumption.
• 1 or 2 units dismantling crane.
• Heavy Duty construction.
Over the years, the scansteel foodtech A/S has conquered the position as THE supplier with the world’s widest grinder programme. scansteel foodtech A/S delivers, among other, the following grinder programme: Single worm and double worm grinders.
scansteel foodtech® grinders are normally used for the following applications (but not limited hereto):
• Fresh meat raw material.
• Frozen blocks of meat raw material.
• Bones – beef, pork, poultry, fish, etc.
• Fat – all types and temperatures.
• Fish – all types.
• Fish offal.
• By-products
Download our catalogues
