EMULSIFIER: Heavy Duty MC 250 & MC 300
The Industry “Work Horse”
– scansteel foodtech® Emulsifier Does It All!
feeding/two steps feeding system:
• Stand-alone feeding pump, feeding the lining/housing of the MC 250 & MC 300.
• Feeding/crushing screw, feeding the knife set.
The feeding pump with its own feeding screw with block breaking/bone breaking abilities force-feeds
the scansteel foodtech® MC 250 & MC 300 emulsifier lining/housing. Entering the lining/housing, the feeding screw of the MC 250 & MC 300 further force-feeds/grinds any particles, being frozen meat raw materials and/or bones. The feeding screw with its recessed 3-bladed knife distributes any products continuously towards the first hole plate securing optimal cutting/emulsifying effect.
Designed to emulsify/particle reduce,
examples only, products such as:
• Fresh meat raw material.
• Chicken bones, pork bones, beef bones.
• Frozen and fresh combination of above.
Direct Steam Injection System:
to secure even distribution of steam and subsequently final temperature.
MicroCutter Series
MicroCutter MC 250 – Pump fed
MicroCutter MC 300 – Hopper fed
MicroCutter MC 300 – Screw hopper fed
Knife Set:
1 hole plate =
2 hole plates =
3 hole plates =
1 (one) cutting edge against hole plate.
3 (three) cutting edges against hole plates.
5 (five) cutting edges against hole plates. With the wide selection of knives and hole plates, the scansteel foodtech MC 250 & MC 300 emulsifiers ensure you get the final emulsion/final product quality you require.
Technical Specifications
Capacity (approx.)
Power Motor:
Length:
Width:
Height:
Weight:
Model: MC 250
4000 – 12,000 kg/hour
90-200 kW
2300 mm
1000 mm
1700 mm
1,500 kg
Model: MC 300
6000 – 18,000 kg/hour
90-200 kW
2300 mm
1000 mm
1700 mm
2,000 kg